5 sets Turbo Pressure Release Valve Kit for Car Modification - Adjustable Hose Single-Sided Horn Design

Turbo Relief Valve Kit

Adjustable Hose Turbine Pressure Relief Valve with Single-Sided Horn Style.

Specifications:

• Weight: 910G
• Package Dimensions: 20.8 x 20.1 x 10 cm
• Material: Metal + Plastic

Features:

When the turbine operates, it generates extremely high pressure inside. While the turbine has an aperture for releasing high-pressure gas, it may be insufficient for continuous turbocharging conditions. The pressure relief valve facilitates the quick release of high-pressure gas, aiding the next turbocharging action and reducing turbo lag.

Installation Instructions:

Install the dump valve in the large opening between the intercooler and the intake manifold. Drill a hole in the entrance pipe and attach the connector. The dump valve can be mounted using a hose or directly connected to the valve connector. Ensure the connection is tight and secure using ring connectors. Adjust the spring tension of the valve by using a metal washer if needed.

Wiring Instructions:

1. Set up the timer and switch the ignition on.
2. Connect the black wire to the ground and the red wire to the throttle pedal sensor.
3. Measure the voltage; it should read between 0 to 5 volts when the accelerator pedal is pressed.

Warning: The yellow wire connected to the accelerator pedal sensor should not exceed 5 volts when the pedal is fully depressed.

Package Contents:

• 1 x Turbo Relief Valve Kit

Please note: The actual color of the item may vary slightly from the pictures due to lighting and display differences. Measurement errors of +/- 1-3 cm may occur.